RES 1999-0647 - PO to Elliott Sanitation Equipment for high pressure sewer cleaner •
ONIAHA,^,t,4
rt
64, V , , ,', , : Public Works Department
►hcr,,�.,� r.� `� Omaha/Douglas Civic Center
1
1
49
�®,,�'�[tito��r ,r; March 16, 19�g FED (IS 2' 0°) 1819Famam Street,Suite 601
Omaha,Nebraska 68183-0601
O�'/E (402)444-5220
D FEBRVr��ry " • . Telefax(402)444-5248
City of Omaha `' ` Don W.Elliott,P.E.
Hal Daub,Mayor Public Works Director
Honorable President
and Members of the City Council,
Transmitted herewith is a Bid Tabulation and a Resolution authorizing the Purchasing Agent to issue
a Purchase Order to Elliott Sanitation Equipment on the bid for the purchase of a high pressure sewer
cleaner to be utilized by the Sewer Maintenance Division.
The following bids were received on January 27, 1999.
Contractor Total Bid
ELLIOTT SANITATION EQUIPMENT $47,334.00 (LOW BID)
Utility Equipment $53,797.99
EDM $54,916.00
The Public Works Department also recommends award of the optional bid for a polypropylene water
tank with 3/8" walls and lifetime warranty in the amount of $2,845.00 for a total bid price of
$5.0,179.00.
The contractor has on file a current Annual Contract Compliance Report Form(CC-1). As is City
policy, the Human Relations Director will review the contractor to ensure compliance with the
Contract Compliance Ordinance.
The Finance Department is authorized to pay the cost of the purchase of a high pressure sewer
cleaner from the Sewer Maintenance Organization 1461, Sewer Revenue Fund 541.
The Public Works Department recommends the acceptance of the bid from Elliott Sanitary
Equipment,in the amount of$50,179.00,being the lowest and best bid received, and requests your
consideration and approval of this Resolution.
Respectfully su ed, Referre32ty Coun 1 for Consideration:
•
.2/20Z
. E 'Ott, P.E. Date Mayor's Office/Title ate
Director
pp owed: Approved:
tia /S / G ` a7 /9/9,
ouis A. D' rco e �'ww�f Date Georg. avis, Jr. ate
Finance Director D Human Relations Director
P:\Pwl\6864.SAP
V
•
p v, v d.
•, _.' c ro of
N o\ •
ta) 0 F.,.. g -__ 0 \
N
L a D
o ill 0)
C. n o O
CT) w v D .
co o
CD
O D n X7 N23
.. • a
N � ma 90 Na� i a o-+ cD _ oo --i
I
a. ti1
O (AZ CI r-O m D
p <n m w Y > W m o
m i 0 p p
Cn O O -p ��
z
m
-\-;\):3 1°73 C--5 -.- ,.._'::::4e2471z.:::......_--'-r-- I tr"1" ,
.._
>i.... b
.-- 2, ....}.,-N:
7... K.
„ -cL.,
-�
. 1
1
... % et \
m �
s 5)$_
. 7 0
0
t''' 13 0.
t:I
� .L.Q__s w t.,::,
m ,
M -a c cis; ‹
m �
c
T I
CITY OF OMAHA P.
REQUEST FOR BID AND BID SHEET
ON HIGH PRESSURE SEWER CLEANERS
FROM: P. M. Burke Published January 8, 1999
City Purchasing Agent
1003 Omaha-Douglas Civic Center NOT AN ORDER Page 1
1819 Farnam Street
Omaha, Nebraska 68183-0011
BID BOND OR CERTIFIED CHECK REQUIRED IN THE
AMOUNT OF 5% IF THE TOTAL AMOUNT
FOR THE ITEMS OFFERED IS$20,000 OR MORE
Bid Closing Date January 27, 1999
11:00 A.M.
IMPORTANT 4.If Federal Excise Tax applies,show amount of same and deduct.
Exemption certificates will be furnished. Do not include tax in bid.
1. Bid must be in the office of the CITY CLERK,LC-1, OMAHA-DOUGLAS
CIVIC CENTER,1819 Farnam Street,Omaha,NE 68183-0011 by the 5.BID MUST INCLUDE ANY DELIVERY OR SHIPPING CHARGES.
closing date and time indicated,in sealed envelope marked BID ON 6.When submitting bid on items listed,bidder may on a separate sheet,
HIGH PRESSURE SEWER CLEANERS make suggestions covering reduction in costs wherever this is
2. As evidence of good faith a bid bond or certified check must be possible through redesign,change of material or utilization of standard
submitted with bid. FAILURE TO DO SO IS CAUSE FOR REJECTION. items or quantity change.
3. Right is reserved to accept or reject any or all bids in their entirety and 7.If you do not desire to bid,return sheets with reasons for declining.
the bidders shall have the right to appeal any decision to the City Failure to do so will indicate your desire to be removed from our
Council. Right is also reserved to accept or reject any part of your bid mailing list. If you desire a copy of tabulation check[ ].
unless otherwise indicated by you. Please do not call for this information.
Quote your lowest price, best delivery and terms, F.O.B. delivery point on the items(s) listed below:
QUANTITY DESCRIPTION UNIT PRICE EXTENSION
1 each High Pressure Sewer Cleaner (truck mounted). To be mounted
on City of Omaha furnished 34,000 GVW Cab & Chassis per
specifications (11 pages) and 3 drawings dated
_ September, 1998 Sewer Division. This unit is to be
purchased in the first half of 1999.
MAKE& MODEL OFFERED
BID $
5% BID BOND TO BE BASED ON THIS AMOUNT.
Optional Prices •
304 stainless steel water tank with stainless steel baffles
BID $
Polypropylene water tank with 3/8" walls & lifetime warranty
BID $
Articulating Hose Reel
BID $
All bidders awarded a contract in the amount of$5,000 or more must comply with the Contract Compliance Ordinance and have on file with the Human
Relations Department the Annual Contract Compliance Report(Form CC-1).This report shall be in effect for 12 months from the date received by the
Human Relations Department.Any questions regarding the Contract Compliance Ordinance should be directed to Contract Compliance Officers Rita
Vlademar at(402)444-5067 or Tony Acosta at(402)444-5053;however,please refer any questions regarding the REQUEST FOR BID or
SPECIFICATIONS directly to the Purchasing Department(402)444-5400 or as shown on bid.
(Please Print Legibly or Type)
Payment Terms % Firm Incorporated in
Delivery(or completion) Name Signature
calendar days following award Title Phone 'Fax
Address
HP-8B (94) Street/P.O.Box City State Zip
CITY OF OMAHA
REQUEST FOR BIDS
• ON: HIGH PRESSURE SEWER CLEANERS
NOT AN ORDER Page 2
QUANTITY DESCRIPTION UNIT PRICE EXTENSION
Full descriptive literature (2 copies) to accompany the bid. Bidder
to show any exceptions to specifications on an attached sheet.
Show company name on each sheet.
Questions regarding this bid may be directed to Craig Christians
at (402) 444-4923.
Liquidated damages will be assessed at a rate of 1%of purchase order
total per calendar day that satisfactory delivery has exceeded 60 days
from the date of delivery of chassis-cabs to successful vendor
awarded this bid. The amount will be deducted from any monies
due the Contractor by the City.
The City reserves the right to adjust order quantities at time of order
according to budget considerations.
Bidders must indicate delivery time for each unit on bid sheet.
Books and manuals will be required for each vehicle as indicated in
specifications. City will retain 10% on invoices until all manuals are
delivered.
All exceptions to specifications to be detailed on attached sheet.
NOTE: REQUIREMENT FOR BID BOND
The surety company issuing said bond should be licensed
by the State of Nebraska and listed on the current edition
of Circular 570 of the United States Department of the Treasury.
SIGN ALL COPIES Firm
By
Title
PH-8C (91) CONTINUATION SHEET
.
September, 1998
SPECIFICATIONS
FOR
HIGH PRESSURE
SEWER CLEANER
(Truck Mounted)
GENERAL:
High Pressure Sewer Cleaner, to be the latest current model of standard design manufactured,
complete, with all standard equipment, tools and warranty. Bidders are to supply full description
and descriptive materials on unit bid with the proposal.
It is the intent of these specifications to describe the minimum requirements for a high pressure
sewer cleaner designed to use high velocity water jets to remove soluble grease, sand and other
materials from storm, sanitary and combined sewers, from pipe drains and other conduits. The
unit including all necessary equipment, shall be furnished complete and ready for mounting on
City of Omaha truck.
The equipment must be designed and all components selected and used according to sound
engineering principles.
The intended use of this equipment requires that it be available for full time use in all weather
conditions, including sub-zero temperatures.
CONTROLS:
• All operating controls including truck R.P.M. gauge,hour meter, overhead light control, heater
control, water control and electrically or air or throttle cable operated throttle control shall be
grouped so operator can have complete control of cleaning operation while standing in one
location at rear of sewer cleaning unit. All pressure gauges to be glycerin filled dampering.
ELECTRICAL:
One (1) Target Tech 851 strobe lights with amber lens to be mounted in the center roof. Shall
have dash mounted flush rocker style switch. Strobe lights shall be activated and by a twenty
(20) amp circuit breaker installed in fuse box. Th strobe light is only to be activated when the
ignition key is in the"on"position. The system shall be protected by NAPA ARA272 accessory
relay. If the vehicle is not equipped with a plug in, an adapter will have to be used. No type of
solenoid shall be used in the system. If the vehicle is to have a spreader control console, the
switch will be mounted in the console. All strobe light wires are to be protected by plastic loom
covering. Base for strobe light shall be#210846.
All clearance, cluster lights and reflectors as per Federal Regulations.
Two (2) rear mounted adjustable flood lights for night time operation. Must be telescopic one (1)
to three (3) feet.
Bidder to supply arrow board mounted below top of truck on rear with dash mounted right and
left control switch with a twenty (20) amp circuit breaker. Switch shall be activated with the
truck starter switch. Twelve (12) gauge wire size minimum for power feed from battery terminal
to Solenoid.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
Page 2
Any electrical components that are hooked up to the Cab & Chassis must be hooked up to spare
circuits or breakers and must not exceed the breaker rating. If a separate breaker panel is to be
used it will be up to the Jet vendor to provide and install. To be assured that not to overload the
Cab & Chassis electrical system.
WATER PUMP:
Water pump shall be the latest current standard production model available, and shall have a
positive displacement, heavy duty single acting triplex type, having a pump performance
capability of 65 G.P.M. at 2000 P.S.I. with a crankshaft speed not to exceed 500 R.P.M. Pump
shall be designed for continuous operation. Pinion gear drives with 3.95 to 1 ratio to crankshaft
gear.
Pump shall have cast iron gear case and ductile iron flue and pump weight not to exceed 525
pounds.
Valve chamber openings shall be equipped with "0" ring sealed across covers. Pump shall be 20
mesh stainless steel "Y" strainer in suction line, located for easy removal while standing outside
of unit at ground level.
Shall be equipped with an adjustable water pressure regulator, range 0-2000 P.S.I.
PUMP POWER SOURCE:
Water pump drive shall be hydraulic with the truck engine as the power source,without using
transmission, split-shaft, engine belt drives, or auxiliary transmission PTO's.
Water pump driven by a direct coupled hydraulic motor to the water pump's pinion gear drive
shaft.
Hydraulic motor coupled to water pump is powered by a hydraulic pressure compensating pump.
Pump shall be covered with a shield.
Hydraulic pressure compensating pump directly coupled to, and powered by, the front of the
truck engine by a live drive shaft, not requiring engagement or disengagement from the engine to
be mounted above the bottom of chassis frame.
Hydraulic oil cooler mounted at front of truck before the truck's coolant radiator and shall not
interfere with hood opening. .
Hydraulic oil reservoir capacity no less then 24 U.S. gallons with internal oil filter(s) and oil
temperature indicator.
Hydraulic oil filtered through dual cartridge filters mounted on the section line. Two (2) spare
cartridge filters to be included valve on both sides of filters.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 3
Hydraulic hose lines running from front of truck to pump compartment to be mounted in hanger
brackets bolted to chassis frame, and located above the bottom of the frame, permitting
inspection of the lines. Each hydraulic hose shall be in three pieces. Supply lines to be large
enough to operate in -20 degree weather. Where ever hydraulic line go through bulk head or
through any sheet metal it must go through manifold to prevent any cut hoses. All pressure
hoses must be weather head H425. (No exceptions.) _
The hydraulic oil reservoir, water pump, and hydraulic motor are to be mounted above the
chassis frame rails in the enclosed pump compartment, located rear of the water tank.
Pressure compensating pump controlled by a throttle cable located at operator's control panel at
the rear of the unit.
HOSE REEL AND HYDRAULIC SYSTEM:
Hose reel shall be narrow design not to exceed 22 inches inside width all steel constructed
designed to withstand maximum working pressure without distortion and have a drum diameter
of not less than twenty inches (20") to prevent hose damage under high pressure tension.
Reel flanges shall be designed to prevent hose damage from contact during all working
conditions (roll formed).
Reel braces inside will be as per attached print.
•
Reel shall be driven by hydraulic power in both directions, either with or without the water pump
in operation. The hydraulic drive shall have sufficient power to retract the hose when fully
extended into the sewer line with the cleaning nozzle in operation. A manual rewind crank shall
be provided. The hydraulic controls shall be at operator reach at the control panel.
Reel shall be equipped with a hand operated hose guide.
Reel shall have a minimum capacity of 800 feet of one inch (1") I.D. high pressure sewer
cleaning hose.
Shall be equipped with an air valve connection to.permit purging of the water hose while
wrapped on reel and drip pan beneath the hose reel to drain excess water from hose to ground.
Hose reel hydraulic to be integral part of the hydraulic pressure compensating pump's hydraulic
oil system
Hose reel hydraulic pump direct coupled to the front of the pressure compensating pump, and is
live when truck engine is running, not requiring any engagement or disengagement.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 4
Hose reel hydraulic pump to have rating of 0 to 8 G.P.M. at 2000 P.S.I.
Hose reel powered in both directions by a hydraulic motor with direct drive to sprocket on hose
reel, or a chain drive through the hydraulic motor. If chain drive, it must have adjustable chain
and shielded.
Hose reel hydraulic system equipped with separate built-in overload relief, directional control
and speed control valves relief valve and hydraulic hose rated to withstand the maximum system
pressure.
Hydraulic system shall be capable of retrieving 800 feet of sewer cleaning hose while operating
at maximum pressure and gallonage.
Hose supply lines to be large enough to operate in-20 degree weather.
WATER PIPING:
All piping subjected to high pressure shall be fabricated of extra strong class (80)pipe with class
(80) forged steel fittings. Pump suction and low pressure return lines may be standard pipe with
malleable fittings.
Suction line from water tank to pump shall be of adequate size to feed water pump properly.
A strainer shall be installed in the suction line at a location permitting easy accessibility for
cleaning.
A valve for draining water tank at the lowest point in water tank shall be accessible to operator to
drain tank without operator having to crawl under vehicle. Drain control to be located at rear of
truck.
All piping shall be installed to drain by gravity through suitable opening equipped with drain
cocks.
SEWER CLEANING HOSE:
Shall have 800 continuous feet of one inch (1") I.D. plastic sewer cleaning hose. Hose shall be
specifically designed for sewer cleaning application and applied.
Sewer cleaning hose shall have a minimum bursting pressure of 6000 P.S.I.
The following power cleaning tools shall be supplied.
Jet Saw (root cutter) (#WJ-49R)
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 5
Little Thunder (#LT-1)
Destroyer Nozzle (Tadpole) (#DES 1)
Leader Hose (1" x 10') (#2H-1)
Equipment listed above shall be equal to Sewer Equipment Company of America. (Equipment
part numbers shown).
HOSE GUIDE: •
Shall be equipped with two (2) three foot (3') flexible hose guides to protect cleaning hose from
sharp edge on sewer tile in manhole. Bidder shall furnish top manhole roller.
WATER SUPPLY TANK:
Water tank shall be constructed of no less than 3/16" solid steel, 1500 gallon capacity minimum.
Tank to have two baffles to control sloshing of water front to rear. Baffles to be bolted end type.
Tank to be fitted with an external sight gauge for immediate reference of water level.
Tank to be equipped with a sediment chamber located at pump suction, complete with a
• removable strainer for cleaning purposes.
Tank to be equipped with positive anti-siphoning air gap type, gap shall be five (5") inches fill
pipe filling from ground level both sides of vehicle. Fill pipe shall be constructed of two and
one-half inch (2 1/2") heavy duty pipe and shall be designed so as to self drain when hose is
removed from hydrant. To have Anti-spill Ring at fill hole or tank ring to be minimum of twelve
inches (12") with three inch(3") sides tapered to 45 degrees at top.
There shall be a ladder for easy accessibility to the tank top. The tank shall have a top hatch
cover and it shall be large enough to permit entry to the tank.
Minimum of ten feet (10') of 2 1/2 inch water fill hose shall be furnished with City of Omaha
threaded female couplings both ends with male threaded adapters on fill pipes. Hose shall be
double jacketed dacron, filler strands 1100/10-10%pure dacron.
Hose shall come out on left side for easy access from curbside.
Shall have Sump for each compartment. If more than one (1) Sump, the Drakes shall be
connected by a conveyor manifold so you only have to drain from one place.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 6
Water tank style shall be round or of elliptic design or square.
Inside of tank shall be painted with epoxy paint.
Shall have a 2" drain. Drain handle to extend to the rear or curb side.
SEWER CLEANER MAIN FRAME:
Sewer cleaner unit shall be assembled on a heavy steel frame as a complete unit, ready for
mounting on City of Omaha furnished truck chassis.
Sewer cleaner unit shall be mounted on truck chassis with a suspension arrangement to eliminate
all twisting in sewer cleaner to insure longer life with a minimum amount of service.
BODY AND SHROUDING:
•
The reel and water pump compartment shall be protected by minimum 14 grade steel shrouding,
extending from water tank over hose reel, water pump and the operator's working area. Rear
door or doors to compartment shall be balanced for easy opening by operator. Pump department
doors shall be hinge type and shall not exceed 30 inches. Canopy door on side of unit will not be
acceptable. However, door on rear of unit shall be of canopy-type. Doors shall open 180 degrees
and have hold opens. Compartment shall be weather tight so heater can maintain above freezing
temperature during cold weather operations to keep water pump, piping and hose from freezing.
Entire rear compartment must be level deck.
Compartment shall also be equipped with right and left, access doors for servicing and to allow
proper circulation of outside air during hot weather operations.
Body shall be of full, skirted design, the skirting shall incorporate not less than one storage
compartment on each side. All doors shall be equipped with grease able hinges and key locking
recessed paddle type locks, keyed alike with keys. Must have toolbox to hold long tools under
truck. Access door must be at rear and center of truck. Size of tray to be eight foot (8') long and
two foot(2') wide. All toolboxes shall be lined with a protective rubber dry deck to allow
venting of moisture from metal surface.
COMPARTMENT HEATER:
Compartment Heater shall be a heavy-duty propane gas fired, forced air cargo type heater, roof
mounted, thermostatically controlled with adjustable remote controls mounted in operator's work
area. Heater shall have a minimum of 80,000 BTU and electrical power for heater operation
shall come from the trucks electrical system.To provide information to justify 80,000 BTU out
put.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 7
Shall have a minimum of fifty(50) gallon propane tank, tank must be an approved propane
storage tank. Tank shall be truck frame mounted. Access door through skirting for easy filling
of propane tank shall be provided.'
Roof mounted heater unit must be protected with an all steel constructed limb guard.
ADDITIONAL REQUIREMENT:
All special maintenance equipment and tools.
Shall be equipped with a quick coupling device so water can be circulated from water tank
through hose on reel and return to water tank during cold weather operation.
Automatic truck engine controls and automatic transmission lockup device for sewer jet control.
A qualified factory service representative shall train City of Omaha personnel in the proper
operation and maintenance of sewer cleaning unit for not less than sixteen(16)hours.
PAINT:
NOTE: Solvent test must be performed to check integrity of primer coat from the factory. Take a
lacquer thinned soaked rag and rub the primer. If the primer is softened or removed, follow
guidelines established with system A. If the primer is okay, follow the guidelines established
with system B.
System A:
1) Remove factory primer to bare substrate.
2) Treat bare substrate with Sherwin-Williams E2-G973 Vinyl Wash primer*, a minimum .4 mils
is required.
3)Prime the entire unit with Sherwin-Williams PSE-4600 epoxy sealer*, a dry film thickness of
2.0-2.5 mils is required. Topcoat no sooner than 30 minutes and no later than 24 hours.
4) Topcoat with Sherwin-Williams Low VOC Sunfire*. Spray to match vehicle and have a
minimum 2.0 - 2.5 mils dry film thickness.
5) The entire system should have a minimum of 4.4 dry film thickness.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 8
System B:
1) Scuff sand factory primer with a 3M-7447 scuff pad or 320 grit sandpaper.
2) Blow off and solvent clean with Sherwin-Williams W4K157* Low VOC. Solvent Cleaner.
3) Seal the entire unit with Sherwin-Williams PSE-4600 Epoxy Sealer, a dry film thickness of
2.0 - 2.5 mils is required. Topcoat no sooner than 30 minutes and no later than 24 hours.
4) Topcoat with Sherwin-Williams Low VOC Sunfire*. Spray to match vehicle and have a
minimum 2.0 - 2.5 mils dry film thickness.
5) The entire system should have a minimum of 4.4 dry film thickness.
*Follow guidelines outlined by the manufacturers Technical Product Data Sheets.
Also includes tool boxes and rear compartment.
MANUALS:
The following copies of manuals shall be furnished with Sewer Cleaning Unit on all components
of Sewer Cleaning Unit:
Four (4) copies of operating manuals
Three (3) copies of maintenance manuals
Three (3) copies of repair manuals.
(Must have trouble shooting and hydraulic pressure in manual.)
Three (3) copies of parts list on all components of unit
Or Softwear
MOUNTING:
Mounting of High Pressure Sewer Cleaning Unit on City of Omaha furnished 34,000 G.V.W.
,vehicle, shall be accomplished by the successful bidder, cost of which shall not be paid for
directly but shall be considered incidental to the bid price. Truck chassis and cab will be
delivered to the successful bidder's place of business.
All mounting bolts shall be heat-treated grade eight (8) minimum. No wood sills to be used in
mounting of water tank or sewer jet.
City of Omaha furnished vehicle will have 120" cab to axle measurement. There shall be a
minimum of thirty-six inches (36") clearance and a maximum of 38" between back of cab and
front of sewer jet unit when being mounted on truck chassis.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 9
There shall be adequate clearance between the vehicle's rear dual tires (1100 x 20 mud and snow)
and sewer jet body and shrouding. If rear tires extend outside of sewer jet body, then rubber type
fender extension shall be installed.
Body shall be equipped with flexible rear mud guards. There must be at least six inches (6") of
clearance between mud guard and rear drive tires. _
Truck main frame to extend to rear skirting. Remove only the frame that is needed for proper
weight distribution of sewer jet unit. By leaving 36 inches between cab and front of sewer jet
unit you will have 84 inches of cab to axle to work with.
Rear and front bumper to be fabricated with painted steel channel per attached drawings.
Mounting of pressure compensating pump shall not interfere with drivers visibility forward while
driving the truck. It must not extend above the hood of the truck. It must not extend outside the
truck chassis rails.
Truck to have integral factory frame extension for mounting of pressure compensating pump
with front PTO take off capability.
Completed unit must have front bumper extending beyond all operating components for
protection of the components and be fabricated using steel channel as per drawing.
Truck headlights forward illumination not to be restricted in any manner by components.
Mounting of sewer cleaning unit and its components must not interfere with towing the truck
from the front, checking the engine oil, coolant, or forward tilt of truck hood. Disassembly of
components must not be necessary to accomplish these tasks.
No components are to be mounted in front of trucks' radiator unless they are designed for air
flow through to the radiator.
Truck equipped with vertical exhaust system.
Provide alternate bid prices for inclusion of the following optional equipment listed below. The
City of Omaha shall retain the right to accept or reject alternates.
OPTIONAL PRICE:
Submit prices for manufacturers standard corrosion resistant tanks.
304 stainless steel water tank with stainless steel baffles
Polypropylene water tank with 3/8" walls and lifetime warranty.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 10
•
OPTIONAL PRICE:
ARTICULATING HOSE REEL: •
To insure weight stability and long service life, the article reel shall be mounted on telescoping
rails at the rear of the cleaner. Reel must be capable of being stored inside the pump
compartment for cold weather operation and safe transportation.
For ease of field operation, the article hose reel shall rotate on it's own radius. To provide
maximum load support, the weight distribution of reel shall not change during use at any angle.
For ease of maintenance and repairs, the articulating hose reel shall be securely mounted to a
steel platform that will use roller bearings to provide movement. The articulating hose reel shall
have a minimum of 180 operational turning radius to increase options of field use. To
accommodate field operations, the sewer hose reel shall have a minimum capacity of 800' of 1"
ID sewer hose. The unit shall be delivered with 800' of ID 2500 PSI sewer hose having a
minimum bend radius not to exceed 3 1/2" and not to exceed a weight of 35 pounds per each 100
foot length. In the event of hydraulic power loss, the hose reel must be capable of being
maneuvered manually. A hand operated crank for retrieving the sewer hose in the event of a
power failure shall be supplied.
For safety and ease of operation, it may be attached to hose reel axle in a positive manner and
drive chain may remain in place while using the emergency crank. To regulate the hydraulic
power to the sewer hose reel, the hydraulic system shall be equipped with a separate built in
overload relief valve . For ease of routine changing of sewer hose, the sewer hose shall be
attached to the reel on the outside of the reel flange. To insure long service life and ease of
repairs, the water delivery supply lone to the hose reel must be a minimum of 1"ID steel braided
reinforced, high pressure hose.
WARRANTY:
Manufacturer's standard warranty to apply and to include one year total parts and labor warranty
and/or 12,000 miles after satisfactory acceptance of the vehicle.
The vendor will be responsible for providing all warranty work within the Metro area of Omaha.
If warranty work is not available within the Metro area, the vendor will be responsible for any
cost including transportation.
SPECIFICATIONS FOR
HIGH PRESSURE SEWER CLEANER
TRUCK MOUNTED
PAGE 11
DELIVERY:
Unit to be delivered to the City of Omaha, Vehicle Maintenance Facility at 2606 North 26th
Street, fully serviced to recommended new vehicle specifications. If the vendor is not in the City
of Omaha area, the City will not be responsible for any cost from pickup or the delivery of any
vehicle or mounted equipment.
Bidder shall state delivery time with bid. Bid will not be considered if not listed.
See attached pages.
•
34,000 GVW C&C with sewer cleaner
Sewer 1
•
•
•
•
•
' ?} TOP VIEW FRONT BUMPER
f
l •
L
•
3 1/2 x 3 1/2" x 12" x ale"[
•
T
:,, •
riihh .
/ t,�` N
. _,...
,.x 3 1/2 } / ..
x 12" x 3/B"[/• I • posm....,, ±
35•'f/_.
3 1/2
• TRUCK FRAME
8' •
•
• CENTER ON TRUCK FRAME. & BOLT ON
•
•
•
•
FRONT VIEW
•
•
•
c ,c
i • .
- 1 --.1 i''. ,
- , , •
• . 1 T. --
•
•
•
•
SCALE: 3/4" = 1'
• y ltr t%r
C y , • • '
•• . 1.
•
+i1• r
• 11tX3U9r, 1990
Cc-a/c ; 33" l
r
.
.
• —ro P U i.e. v/ 814 Pr/I c r
. Rear
• Bot}orh 0 +ruG/
•. 8011 t.� +�
• • - �• ,crault 1 To p 0 r Bur,ptr
. • _\..
z. ' foz8" abo;c grou:
•
I .
G •
17 '
3i• 'X3�'XI.uX�`Q C a •
o iu „ a t„
lLxifx3Xe, [
•
_ .. �_ 3 — -- ---• '.,
• Z�°4, R.IItr • .
. • \ . •
•
. . 8 -
C t . j • .
.r_f • • •
•
•
4. • •
•
• FroN4 V;tw •
1
_.__� fia w Koo KS �- 1
�• _ ____•_
. ,
• . • .. ............
. . ,._ — ( -( ..) \J e.-1 i •0 kC/e.- -----/ /
.... ....
., . . . - -.tici.,,,,„.;..,.. .. •,. ;.:-.- ,,-.... : •.:-...,.-....•,..:..,...,.,..,,,...;...:41.-r.*.--.1,:ic,::Q7-...et.5-4..A..1..e.wA0-4,I.P,',-;lik,„;
. .
:,..i.i..:.. !,......-,,,....I • • - . . . • - . : .. -,. -:-,s • ... .-s, ,-,It ,..-,.,,;,:t..,4s.,-;-.-.-.,....-...,......:.,,,-,:.:-..t.fp-;. -i-,,,---Y.:4;,1.1,---;:-..---:,•i%,44--41.,ii,k.a4gz4d,-;1.:4--
....,•.,: ,,,,,,,,,.:-. . ., ... . . _ .,;.-7,. ,.-/.....4..., . -. ..,-:.„,,,„e„.,..ik -.•:•!..=-:...F,......;.... . •-. .. . ...,...,,...,...,..,vc.-,..;,.,,,,,m-,...-e.-i.,-,..,4),:-.,,,,„.1. 4,..,..,,,r:,,,,-,,,,„ ... 2.,--,,iii
,.... • ,•-.4-, I: .. „.''.... :...;=,+4. ,...t•„•;,, ‘....::;1:?;::.,...r.•',.,”, .. ,.- .-...,...-... ..i:f:.?..;'..!.•::...1.•,..?..';::,':.!...--1-'',141,t'l-r14.6",,:,'1.7.g.:;i7ivirk.
!...-. . ,...ts........ • ; :.., .....t.... .,', : 1•Ift.,=7,:...i .71..10',,..•...,: ?..:f.', .:.. —. - •B.,..,,-;5:':'..,;'::::4:;.;,:.,;•:1,•44,....:,.r;.,,....r r.i.:yr•av,'•-.‘a: ;74.....,..,.;
..- .:i..7--,..-. 1 - . •.'.....:.,A, ;.;.:.).,,:ir.r, ,....1,,,,i.#6,:.• 7,,,',..-. ..,..,!•;,;_?.-: .....,•:.•:..,::--,..-.i.,,,c.-..,....,,,it,,,:,t.,..;,,,.:,:,,, .--:,,i.ilr,i•..,v4;,,,,:,,,,I,r,.,?iy 0.. ., .,. .
.....,,....,:?.0,..k.),,..,,-,. .,--......i:::4.;,,;.-44...4„.„1,,,. .e.,
: i ';':••-•r,;•::: 1 • : •••••••••;•••:. >li 1 ...•,••.•r..; •At;',.1.,.;.ivt•-•••,• •:-:-:.• .••..•••;t•.-...'....!•'.••••.:PY(.4.;:s....1!:,..-,:).v.tt-e••• •••No•slA.V.0',•.....,,,V,V.: 1 .-• .4. •;:i•I ' • ; . ..• ..:"••••.:•:::.•:•• . %.wi,e, ....le :.;=.4i.......,:•:,:.....:::::.. ,...::.-.. ,... .,..-,.:,••:.7::,!,,,y...,,,,,i‘ti!:,..,...i.,,,,,- -i,:e;?.,..Ti.k.i.,-..,f,i,,,,,t,,,,-,y, -
. . .......:,..4...itit, .. ',1-4.1,-,,_;,,- --„1-.,,,,:".,,,,--,1.-ros:-....•C-.'•'-',„,:7"/•1-•:-.•:-:‘....-'ft:-zr,.•:•;':;`,1•,:iift;;-.7i,*:-i.f„:/Y4•'-;-‘,4„..,al?15.4-::::::5•14,:',P,•15fie.•
• : •:'....'''''''''‘;4'" •- vt-'9‘).3' •41:4,-?'•;.411.11,4'S-'4':;..i.'''','•'-'1'..:.'-:'''-'i',•"-:••••';'-‘Sr.:,•••:i:;-:1-4'Zt,.'l:.'7 It:;`-•;•-'.'ff:'?*114'1/4-•44‘..'-'114:rs'il',,:e'r -•-• • ,
:-' '•••••••••,:,IA', • '•...4-. t:-...e.:
,.. . ..3) ..,, ., . ,. ... : .. ,.. .,, - .,...../....;;;•,-,.4:;.t.r,.4i" 4.... -..--'...-4 -.4:eiii,';','4,24;'..i 4....'.!.';:;,',:4....--„'',1,4'.•-i,y.,,:-,..;;;;;;'10/P-'41.9A•44101.4".:;•:,-,,tk,;,:',....-r.i. .14.'..41, I
. 1- . ,,r)i''-,-...- ,• .•:'.':t•-. .,. '. •• . ,-. . ,::::,.:•::.z.:-..-4,,.,4,itl: i• vm"%t.:.--. ,r7,47,f,:-.4.'n::•le.':•;•^,...`,'A-f'''''1..),•'7 ,•.,4::.V112 '.';''° Fe.'41.5.1,Y.'04fi.)1'W42.' i... c:i;,',..,le#2.ii":1!",•;','''' 1
.1...-. ‘.•::kt...;:.'-... ... ..• •••• ,..,....., :......,.14.•-::..:, '•-...,'IltiV.:.'4. ';'' 'i-.7'..'11".1:....: W•Afi'...:','.. ... ..:...,:it'itg.';..,....,1,./.:,:,„.„.1'. '4';,-:',,,x?,s.:.,34..1.14,4.7.„.,4,Pt:...,•,-2-,. .A194;!,
,..,:.,,, ,..,::;,,,.... •,...,,„. ...,..;.4,,..!...„,,,,..,,.1,•,,_.....:4..,,...,:: ..,,c.-;4,,,t .!,.,,,,...,....,..,•.,,,,,,........:. ...,,,....n,...,.....•..,.:.,..e.,.....oice.v.....:•g/./.•-••R,I•".•44.,,,I,Vii,'-'.,;:•,•77.,;••'
'1..1 :,,`1, •/,t, , .:..', .-,`•:.1.,"'.'",‘"?'-',-•i•.*•',!'',11,4%'.,./,; •'' '.1,1.:,?-V...Arti•kj • -Lae' r•;•, -J..,•4', "r '•:;••••.'• :.••-':...•. •."..'•?:•:•-•/".,••:' ,•,•••‘,. .•::•••:!•%•1.4'•-e...4.r...,.;..'.?;e.4iC.?,:j4tViit
14^.' :...'4,,:•-.'r•• '.'...:;••••1:54•:7*t.A!.:4•1•';•:'44i""":•,••:•::,...,1'.`i,,4.*".*:•.'4'4. ii':.: . •r....4.117,61mx .;:t:•;;I•V;,••••glt•:•••:• ;'..•.• •'••,....".•'.....'',.. ..11:!%. *•.*:•••ZS.7fA•Pir.)411-3•Pirr-7•;;Y:.; ',1.-2big*.-r-'/,,, ,
•.;s ,', ,1,-,1;C.v.., ....,•41.1„...t,),„1.,,..7:.4.. 2 A",,.•;•54...,4•L'Fil.,3•.,:i;;:,,,1•••:.0:,.. ,„...... ,p rra....j,........,..... r,„0.4.•;,,i,,;•.f c..1 :••...''.•'.,:i.:•.."'",,••••* •:•%•••;.C.:,.4.,••••••••••"P.'":•,/tb••••i:41',,','• . '''.1,•,,•.,1•••1"..rlis..1;,§itt',1iit'iii,
* .::,‘•• '"IT•.'_,Iia..'''' . •;•:? ..t C1,0,1;t'r:',:,.,d•-•... •_.,.• ,,t'k'' •,v.`4,g4.,•0•41. •-••,c.. 't..ii!:)'••••4.; t:I.o.r.".•2*/.'....?•;:. •• '...., *,•......•'...lp..i.i.,4 ,J1'.::•“,•;,..,4. ,' gt;,;417er.,;-...t,,..i ,..4:Ap-f:, •
•If ';,t.Y.::;f'•";-•--"...':,4s7-..."4,:2J::.1`.T.TI•it,,gil,i ,,'", ''- .'11.„..c.,:; ,','E s .1-f-% • :ef-r,,' %;:',-:•••:' ' .. -,': ...... l':' ..-,, ::::,.;•;f.,:(;@ ,-."-. 4.?;',--.744$•-:•'. -'`lek'hVz"...
. t•,:.,, ••,,i.,,.;,... •.•-' -:. :,r.,.:,•.:.,=!;,'•,;,,,.;::...i.‘.-ig,.:,..• ;.,,:r.5-,;1,•..' ''t;:,.. :, '.,.:',.. • ,?•,-.1,1.',.-;•••.:•-••.,,•:• . -. , .. —.'...'41-',,,...:-....i.E,gt;,..' .„.4••:•'.„'1:4`7.,;.r..... -4?.,•.....,C••• ...1,-•:,;,..`;'..; . ". '-•.!..-..--.A';-,/,'.:•-:::. ,,•:: J '-• .•,,4,, • ,' •••:', • :•-•1. ,-.,.."'..•i ,.., .:7$';,1.'.;,......: •- ' '•- .:*;••••ii.?:::?-1-•`:-4,fg.V.0,,y.",1.4, ,,,,,.••.:'-'7'?.;•.,..,,-,;: ',7•1`,..i.4'.: )'...,.,..'i'r•' ''•.... :-0.: ' -•••...P....Y:',1 t.' .: '5....• • ....'.`,...‘•:''•• ••.'..4 .• S• ;f.,,, . ",;,:,;.,•,••• `-....,....... .. . . • ,•..„.. , , :Y.,'..:4•'.':':1,•i(,,v' 017•?‘•,,,.V...:'::._,I•ii:4;;11..,C,;;I:
V •... :.::ici„.:.,":., '. •K-• • ',....,1-e:S. j' ; ' •• ' •;;', • •." .,.: .... •••,*(it:::("..;,'-'.-• '.4,7:4?,,,4'4W,..4,,*).',3
"Cz:•‘', s.,',,;1:(:•.; . .,./i, .. •• • 1". '•• • ' -f:...,..*:'...• ,• .7 '•• .•:-.: :0•:;-",:-..- ....... •--: - /4 •,•• .'.;+, .• :*-...:',.„1.'••Ir•W•7,''''''4'' '"d's rAVIMI,,,_,:;;i1P.?..z.-1•,;;";••);,,,: !es•-,:(4'';',,Z,','• •'•;••;:y.': • ., ,......,• .:; '.,,1 fc:. •-:P,,'..... 1 ,•• „ zg. — • `...%:',,74: , .: , .•- ..•';..-.,._-.i',,4i,J ';•..;'''r::1C.':<.):''''.°-.'":0.1..0. 1.-T—_?,A;VI:PA„,'11:1....
,••:- -••,-.. ‘,.. , t',.., .:!; v:-. : -,4.,,-,,• -- :;.:•...-'4•,'1,-'/,•,1::- .-''': ' -'-'' .. •f:::;,,V''''4,;'?•;9,1,UW:f.:1'2.••"' •••T'''''''''''f'?i''''''.q''.
rt''''''' '''''''''''';'.. ' ‘v.q 1 ' • • ':'-'''';''•''- • - ''•1•- :. ;',..;•;••• ••, ., '.. •,., 0:k,,,.. ".:'.,"if:',:•,',.,f1.;'•`,",•;,,,:-''a•7,:%1 ,l',•:.,. ',.?..$'....•.'-'.'.etly''..4.1.1,i,lii'''oey•/•''.1,14%.,e,,,';:,..e.i.,1,i..•
i::::. 1.-4,•!'•.,1•t• ' "-.V!, : ..,.''... •• - • .., ...;.!..,....'.. .,:,•i ',•,: .. !'"•1" •:....•,..::!:..{:::,-••,,::',...,;,.X.,•ts...,4is,.pe,. ,,V,:.,1,-;.;.-..,:i.- '.-.:.,,V.... ...7.4,1$--.1,1Wir,I•41;1;,iirri'f•I`
' t'..-!.• ;:3;•:,.../ . .I .: : .''' •• , .,-% ,, -,,,:i...i.::;••• ': ,•,;,,`0 .,.;•:: • •:',''''....'•••,.;k••-/j,f;=‘!:Cm4X,44 •-,.i,V,.•11t;.'-'1...."",:iit.'74'.... .1.11A415,41 e.,i!...:t.i-V4s,-.•,-, 4
.11..,-•?::1;1:'.:4.,.ii...4:est;ii,'"5:‘,.is c••"'-+A.' .r;., , •,- 2.1g,-'•,
• .:'; ...;.: ..; ; - .,.. ...a•-•" ,-..-'-,",:...,••'.• ' •...--'i Z..7.:7;N:0 •. - -...1`1,:;,:,.:;'-';, 1.;,‘.4,:r•.e.• ` • '" '
Hose rubbing side of reel causing abrasion. • Actual abrasion of hose,caused by bracing of reel
....•••:*,.,<, .,,,,,:i-1,1,!,,Pf:4;<li,
....re -..; .;00.1•se'..*Ire—; ..,,‘4••:4<;', ,,t,triAljtliliit.:Ranri,:•••,:i*?;:•2•re.Ps.,,,..:•vv.••;?L
.." ••,:.:...,,. ,,-..,, , --.. ...,.'..,;..:s. ..7.',-,,,-,......,:.,...i..,, ,:.;,',..i.;.•:1.1.,!?;:t-A..-.4 ''<•-;;•,yet,•‘', !' J. • -,!4•icl-wls,tfo'::1•-.14i•-'N' •,,,!?•„4.-;:4x,...:,..._:;,..,,,,,,,..,,,,>;„.,:.:
4*4
,. - .•... .-. -.. .-.- -.,.-.!:. ..1:::',-,.....,..,....-.,-,;-!....F.Y.,,,,;;:.,..,i, It•P SWft• '.4f-""`' • 0.4kti.44,,3.4i?!,....::.?"?.,.:4,,,,A,4,,,fv.T.,::: ;•,;.&i...k.,-.
. , . ...,. . .; •.. ::,,„?..;.,...i.,•;.:, ..,::::.1,5:,;,rz..i-,..,, 71,,•• ,.....-;,,a4g11- •r't.J;F ,,..k,. -,r..411•7 ,„1-`..,7-`j,'..-:-1',-,:i's?',,,f.*.:4,.°,4:A',1:[•..;:;X-,,';',iiI,t-,14,ar".C1.Yi,fg.,,,...1::,;
'''.-7:::.-.1!::::..--:i•.• ; 's'••:-.7 • t-i:!::- ' •,•.-•'•"..•:•••••-'7:r':q.,"..,0,1nr,•,,v.-..-i.: ,g;-•fj,1,:,:, '1.Tait,r1:..` :1.;•••••:;',"•Iii%.,'-;',:"'-,.`.,'''.• it‘'V."-•.,,q,:fi-,7::.;et.j.'".
'1,.' '' •,,,th•re .k.•,,,•,,,,-,•,••,...ki'lt 4"...:•:.'•••••..,,:•, ',.,.,0:,•' ..':if••;(35,•••• .,:,..ft.tik:44•.-1,••
';'iV;i:.:..i.;'';;%::.• ':;:i. -::':•'•", '':••..;..•' .•:.. .....•Y•1,•";4..-!•'.•,••••••••'..••••t?i%...i•tr,, 't•%•Y,•,',•%*•:..;.;1 ,'Ireti. • '•r(900,TV tz;•,4 ''',...1;.fs..f.„,;:,!,',,,fi.,t',,,':......".:1;:*•,•;.....y.,•,,*,r••:...- -1,- ,,-,-,-; •,k;,-J.1.,1.%,-. :,sew .....,,..., .......,......-.......- .4.-bc..,,,_ N..-- 1.,f..-• :•:3'•:•••': ''''?".i A IN,e, ,
,,,;•';', .4',:•P!••;,.:...,•"•,,,;45•,'',-.I;•;,;•.:v%.*v...' ...... •'.....?.•?.C.;::'..,`•$-%:,,L,'-'74.;.:::4 111;;f :•, ,. , r-,.. „e. ....,,,,, ,,,-.,.“.5....,,,. ,...,-,t......-1-•,,,t,..--1,--,,,'-•••••'t- - • ,'fa41 ',4.1.....W i.'4%.',::/rt..;::.,.:::."..:•':,•:1:..i..;.,:.ij::.1:.:;':•.:.,,'.':..!.......“..,..'1....11::,.4''''.17.eV;i1A..* 37.-... ;.: 0 .::e ,,-41-•,•117 -, • - • - -- •1,-- 0,•<-1.1. t,t...•f.t.,:,
/...,.,,,,r,:„.-,...,,-.,•:1,.... ,,,•••,','^.-.-, •''-'e,tg-••,-s,tv.‘-,,l'o,•,,fst
,,t' j.,,'-4..•,.•7.:-'11'.1.`:,•,..,:::f..,;•;t.:13'- ,..;'...r.••••;,-5...,l.''.:1,-.f. -, :--:,-Igi!..i.:,.0: ;'''.if'.....i.e.: 1 '"?,•te. •,.-'•','.:4`.;7',A1.'1',-i'..-,;''-':,--...":.;.;,-fr.;•,'•‘'.';,:!.?..:•,';':::P"'i:;!.:'-.:.:',!;-.".".;*:'k••)15":e'i..!:-9,-
. .Attlie/1::?.'i.:`, ..:1;'/J.!•;:;:....r. ..;,•:).:;..'..'-',4.. .;',;'..7....'.*:•••.s....;''';•:':;:'..-:;'.f.''''''''''''..',::.. ,;T:':,. '14.: • 1.;i4,4!'1::*.;"' !;;:i...;:..',i1I:t`.::t.,,,;;'..;:• .•.!?,%.*: ;!...?.',::...:...'`;.z: ::..',1•;•;;,:114V•Wgif`P''',,..LIUk. •
. 40-^4•It'i:746"::.''''',.'4.'•r2.10V1',..i.`,..?Zi,'•`.'..t..-4 ':•.•:•••'•','!.......s'.V.:ts:•!;:'':',:f-1.%,,,--4.! .•',. ..7 •'4'.,- '','Sti-''''4';'3•;':'"!,)'M.' I .".1...• `....' .' "•• '•''''•• •'-......'-f EV '11c,',:At•it.r,41$?",,A-''fies ififf3titifki...k.lt.0..*4-..,f.?::•:kk;e4 ,1, .-...'''': ..-',1;...,!..,,IV•7.;,•,::::;14;f.,:::'"i'.111:W.3.1 ',.,', t' P.',-..,14. ''-"•.;'."ed,;r.-.,,o'ilig ,Ak!",,lik:'):--••••••',-,'::"; %... 7,--••7•.',f.;*.""* Inci.lifP:,,14-05`.
...erk,41,1,P1%.46.1:is;;"• -• ••• •-•41.-.,<•,:,<•;.,-,...:• -..,..-4,-.,,',.• -;,..fit' "•••••,,:it.4...Attit
:,..':."14:7•,‘„z..,,„;;•-y.tialMiay414,1,41tri;,t:,•:..,.. ' •••.......";•••:,•,.„-,...;,••••.,•'-,:.•:-.1...7•:':-,„‘,.%f;•` 4 CssiAk-u,4,,,,4".:.`'', :..•-to.. ....,,-•:,,,,,I.s.:?•••••••-..i.-fm, .:,:„:',„ z'•:-,,,,..,<Af..„.,-,_<,,,,,,t•':,x
-:...,_,!.,„....,„.,1„,:.;<,;-„,:::3-.,,:,...;;;::•,1,....,1,.;,,,f).,,,75.,i„.1.„,,,,,,;.,,,,,,-_,;..4.. ,• .....,,,,..,„,.,:„......:.:.,4.,....i.,,,..,..,.,...,,,,•4.4„,....•,,...,,,, ; ,...,qs.,,..):,,ti,..s.,:-.,. "..., ,•,•:j.,,' •.-........,;,i' ,-.1i.j.i..,...:•';,..4,;.• ..:. ... : ..r-i;',,i# 7.;Zrei-44e,"7,r115;r,1.''' VP..71.{, ., ..,...••••„1;,;:.t'•• ::,-F,.. '*`•4.iiP •II ; •• Iti••i :Ift>'•111:2.;' '• . "..'"..:• •. l•4) :.'..-,.'•.*„ *•••”....,,it, •••••=!,Sig ,-.0tfer4.,44A41,,
-:-.7.--;:..'1 .,:•••.•......• .. !tf..*.•,-..'',,....,,...17,41,..,,-,.,',A ... ,,:y.6:!..g.,,,1,;!':::,:: • . . . .1' --. -..;Er.D';.:..zs,,.•,...;•.•.... ''...:. ,i.• '...1,4;•.,• 4.10:41, ,..4
•,,, • • t .•,.. ,,, „,,, ..,4,.4...,,......„...„...,...:,,,,:,-4,,,,? -: .;-;,.y.4.1,',:-•,...:; - .— • • ?.. --.',,..c.., ',04, .,..f„,,,,-...,,,,...„„,.. ' :••3 ,i744.,{4.1,-.A.),
„....„.. . ,.... •., ,,........„f ..• . ,• „ ::,,, .••f.:, ::.i.!.:•,:.:•-*;.•,i`. • .., .,:,,,,•:!,..i. . .• -,:,,,..--.'...:.,!... •;....yi, ..i4•.,..:':•-•,':
. •.,,,..a.1: .., ,,,s,.....s,•-•4...,4 4t;. -, t; •
. „:::... •• - i. •••.'•,:s ;.,ts-i8...•‘..,..,:e.%••i're PI •• •:4:4.-.. ••..0.4' .,: , ..*1.'..• / •" .• '• .•;`.'4..TP,....' !;i:.;'.4.,i(•'....../,'',::..4; ,,,,i'',./...4,1:14•:•7'*;•;,/•41,
:,* ::i..•'.• •• qi,' .- ':'s V,,t't? 44.`...i4'.....-PVt.§%3)..)...'•.,ti-C.4° •••• ;.''- •. ••1•". ‘...,....,,*,,.. . .••,V:Z=!„-•''''54'.",':' •-•.„‘......:..:::'`*.;,",17.10'7,44,111VA•4 4.X•4`''':••
, ,.: :t VT.:. ?E.:,••,•?':\;''''7itt,,•;•:•I't,•":1•Tt•••'4'./...'''• •V. ' ..,.
'••'''' • .'•••^•''••••••e!•-:•• •• •f''''''''t:•:,t'. •• . .-". ,, ..... • ?.f...14.,, ,:,/,,,,•--4....-...
..•!•••• ,-*.—-,,zi--.,....,,,,z,i...s.trs.,:,.:•.... g .... t ., .
-• • • : ..•.-:• •,.., ,....,!.,..i.-...;,,,,ti.•,,,., -,•I •-,...;....• : ,. .•.... ,, ti;:.4,,,,Al.,,,
—.. •• „...,,,,, .,.:••,,•,,,,•,.,,, i.: . •:.... :. • - :, ,,..-.-,..-.,.. ...7;•,',/..,-,:zti,...,,,, :-..,: ...••-•,.• -•t•?..!'ketr,.,... .ilf4t AI'
. .. ... _ ..._,.. :,-.. •,'••;r"4..k.f.k.e.-;^..,,-,' '-"ii i."-: : • "'' '-'''- ','''`""t,':-..-.‘,7N --, • •••-*.o..ti•wle,i-u.r ?4, :;fit I.
•',. .rf.,.C.:,
' r '• • •,.... •.T ' gsr%. -.,,;.t.ilkx,e, ,,e31.v.;,.
' . ,.. . • ';-.•;••?A-.;•4.;,,..v4r.'.... ',... .• . . • '..... • --,-,,-. "ox:',, ::'4',g.4.. . ., .,•'' ..:I,4,..'-,,Tg,.....0•
. . , .... .... ..;.:. .‘z,...,/1.','.. ,.;.,....1•. , .. •. . .....,....,,,,•:..;...•.4....,,,,,,lii...-,i.e.... . -- ..,,;.,...'1:..y....:431.:-..!;.r.711.4..,..,,,,,a.,,,
. .. . • . . , ......„..,...,:?..4.)A..„:„..24 , • -,.,. : .... ,....-.. ..st..,---•....,i:.,:•::•kl.•;•-4..F,:,.,,,c.,,,-,,,,,' . ' •.. - -
Bracing done by city,for added support Added bracing
....A.,,,,,,:.-I,,..,.:.•:„<,,,,,,,,-,- , - •-•,,,,q,-Asi..,•t:'.,...„tri.i.fr...t.. ,,:-: .<, .‘'i.,*1.416'''';',„,...",.„,":4,,i,,,e-, pigtv• - il,.. — '4,-..;Sgil:i;w4;„; ? ,....' ye-::s
...,v .yirt,..,.....5•,- ,.. ,,,,r.,2• . .•• .... ". 4•••?...7,1• ....,, , ,,•• ••
4,":3".. .•'•",iy.,t,,,1,1.'C•V•"."?•V•J'.14-" ' •41'j4t,WSW - 4 •:'. ..*
12,0,7t'R,i•t'4*-Itti?,:d•''' '• : . : '.., • . .?..:3i1IMC"...'..' i: :.••••
, ,,,, .ie •Yavve••".volt. . ; ,, . ..„,, ;,
„ 4 6 . •,.. . . •v541,,,s. • 1;,-.'po ,,-.,. ...-if • rtf:•-•- ,:, '
- • ITag.'ilkt -,r- - - % . '' ..,.....,-;,:ir-r-,....7.1•:;,-,,, •i . . .:;: • .
• ,, .., •,....,.!..-,...:...:. .- : • -....,.:.;?,?,,e,,,,',/-.,•-. 44 , -.,.--
.-:.,-. ,. .704,,,.....:y. .....,... ;47,./Addr,,-.• /./..:'•••:i'kii( .1-
•• ...'`.1....•.:•t•':.a.1./ • : ,0'.'‘...r..!,.. :,,,,'•..;.• -.0;:ei- 1. .,
. 4., -•••• •i:'Lift '•.. ' ••. .12.',./,•10A;7 js,•71. -..A. •1-' • 4..-. ...
....,-. -,.... ,—.- .i •••,•. ,•."••••••'}' .- , t.•;,1• A •t- ••.`.. '-., •;
j.
i,• • ', "".;.'.-',,11.•I,/ -...‘•.-,3''1. Yize (,'.";. •
1 •• •
‘14-!"1';' 1., . ,':r .'.''''. l'i.;3.:''4,,•:' .::',-, '13z -• -. .. .
" . ;:t.'‘• ... ;l'.I:**.;....;:1'7,i.1.i•.i '... . •
'''•'! !%..;''.;?.,• I'
,• f i' • .. k!,I,",',V1.14,1..,t,.,. . .'..'•, .•..• --.L,'.Pt.f. ',V..4..-;.,•••'i.7.,,1.,.',::1.-c.,1•1:;..•• W1v.%,,S.“...t.„,,•,.s,.,,,;';:..I:.1:g,e•,,,,i,,,.1 ye.*'!".•. -. .
'' . .— r h? ;
r /P
•
•. .• •
,•,--f,../ •ii..5••, ... . •
' • •
.',-..,),.,,,3. r, '.i•...r L2'1,!c i';'.1,e,leiii"..;,'1•4',;., ..-... •; 4. • .
:,,...., '',...:1 :i• lo-.4.•,g,..<,•':.ti....1,r`,•;. •;.,,,,; ,. • ,,„,.;,,, .•,.;r.......1.1; ...iy,:.....:•5 r...47'. ,
'''' • ' 't"' ..'i i'1.0,...-',';•Li,!.,;••;k, •: . '• .
,,.f . 444 M.''''''''3'43 ' ' r.
..• ,,,,i , :..: ,...t:-.it::,;-4,.,.,it..,i;...,..,,,...'11,1.,:(*.; "t .-..•...• ,A 4.:
aisi...r. . . . A: p''el 1•!Itt,--"'.'"4'''''-' 't. -
Suggest using round stock for bracing instead of flat stock
•
. • •
• EXCEPTIONS TO SPECIFICATIONS
Check One
The equipment offered meets all specifications as set forth in the bid.
Name (print)
Signed
Title
The equipment offered meets all specifications with the following exceptions:
(Use separate attached sheet if more room is needed.)
Failure to list exceptions may be cause for equipment to be rejected at time of delivery
Name (print)
Signed
Title
,c-Zsa. CITY OF OMAHA
LEGISLATIVE CHAMBER
• Omaha,Nebr March 16, 19 99
RESOLVED BY THE CITY COUNCIL OF THE CITY OF OMAHA:
• WHEREAS, bids were received on January 27, 1999 for the purchase of a high
pressure sewer cleaner to be utilized by the Sewer Maintenance Division; and,
•
WHEREAS,Elliott Sanitation Equipment submitted a bid of$50,179,00, being the
lowest and best bid received for the purchase of a high pressure sewer cleaner.
NOW,THEREFORE,BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY
OF OMAHA:
THAT,the bid of$50,179.00 from Elliott Sanitation Equipment for the purchase of
a high pressure sewer cleaner to be utilized by the Sewer Maintenance Division, a copy of the bid
documents is attached and by this reference made a part hereof, being the lowest and best bid
received be accepted and the Purchase Order be issued.
BE IT FURTHER RESOLVED:
THAT, the Purchasing Agent be authorized to issue a Purchase Order to Elliott
Sanitation Equipment for the purchase of a high pressure sewer cleaner.
BE IT ALSO FURTHER RESOLVED:
THAT,the Finance Department is authorized to pay the cost of the purchase of a high
pressure sewer cleaner from the Sewer Maintenance Organization 1461, Sewer Revenue Fund 541.
APPROVED S TO FORM:
IS T TY ATTORNEY DATE
P:\PW 1\6865.SAP
By .:1-141173+40)Ife44-0
Councilmember
Adopted M' ' 1 6 S., 7-0
be,
/ I City C 7k
Approved 4T•4 : ... - /
ayor
•
i.
-.
/ / & ril ®
\ \ \ \ \ \ \
> _ = n § n ƒ
7 § 8 § I.2 \ p, ° °
\ N. \ ƒ k R } 0 @ .
SCD
.
0 2 & g , § O
4. ® _� . \• CD
q i 9 cs• _ % & §
R 4.� � — -' E
` n \ N CD 3 \' .
2 § °
m o
k — / ti1 .
2 \ 2 § c
\ 7 \ •
k • %
. q q q @ \ k
•
r / .
. \
•
•